Infinite WaterColors™ Smart Sync Controller Full Manual

Infinite WaterColors™ Smart Sync LED Adapter

Installation & Operation

Model: IWCSS60W

Requires Jandy® AquaLink® RS (revision Y or later) and Infinite WaterColors™ 300W Light Controller (revision 2.46 or later) to operate

H0830805_REVA

WARNING

FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed where such state or local requirements exist. The maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in this manual can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this product. Failure to follow warning notices and instructions may result in property damage, personal injury, or death. Improper installation and/or operation may void the warranty. DO NOT MODIFY THIS EQUIPMENT!

Improper installation and/or operation can create unwanted electrical hazard which can cause serious injury, property damage, or death.

ATTENTION INSTALLER - This manual contains important information about the installation, operation and safe use of this product. This information should be given to the owner/operator of this equipment.

READ FIRST - SAFETY INFORMATION Product Overview Installation iAquaLink App Control OneTouch Control Amazon Alexa Control Troubleshooting Download the Installation Manual